How to Build a Go Kart Frame


Building a custom designed go kart frame can be a great family project. The whole family can build the go kart frame using metal tubing or angled iron. The satisfaction of creating something that a person can drive is incredible. Here are some steps you can take to make the dream of making a go kart come true.

Procedure:

Challenging

Instructions

Things You’ll Need:

  • Chalk
  • Measuring device
  • Angle iron
  • Tube notcher

Build a Frame Using Tubing

Step 1

Sit yourself or a family member down on the floor. Envision yourself in the go kart. Use chalk to draw measurements that are comfortable for the person. As a general rule, go kart frames have a width of 1/3 to 2/3 two the size of the frame at the wheel base. This is accommodate two riders. A wider wheel base also makes for a more stable go kart frame.

Step 2

Use a chop saw to cut the metal tubing to size. Then, lay out the frame and note the progress and how it looks.

Step 3

Use a tubing notcher to weld round to round tubing. The round tubing where the feet will be situated in the go kart has to be wedged precisely to the tubing. This is to ensure that the pieces are together. This is called “fishmouthing.”

Step 4

Saw the round tubing until it is flat. Then connect round to square by welding. You can heat the round material and hammer it flat as an alternative.

Step 5

You need to install a roll bar in the front of the driver’s position and over the driver’s head. This roll bar is a protective element and can prevent injury if an accident were to occur. Customize the seating arrangement and your go kart frame. Make sure the seating isn’t more than 2 inches from the ground. This also prevents the go kart from flipping over.

Build a Frame Using Angle Iron

Step 1

Now, you need to form the go kart frame. Using angle iron for the entire frame is optimal. However, you may use angle iron solely for the parts of your go kart that need bent angles. Create the basis of your frame using step 1.

Step 2

Now, saw off one side of the iron. Heat the iron and bend it as necessary for a finished look.

Step 3

After you have the shape you desire, weld the iron by heating it and bending it. Also, reinforce the frame will filling material.

Step 4

Use Harbor Freight pipe bender to further customize and bend your go kart frame.

Further Readings:

Filed Under: Cars & Vehicles

Tags:

About the Author: Vincent Carreno is a cars enthusiast who loves all things about cars and the automotive technology. He is also the chief editor at a local magazine which shares new, exciting and informative articles about troubleshooting car problems.

RSSComments (0)

Trackback URL

Comments are closed.