How to Repair a Flat Roof


Roof problems should undergo a roof repair  with the help of a commercial roofing company as soon as they are noticed. If not, the damage to the residential or commercial roof will get worse and worse, turning a minor roof repair into a major one. This is par­ticularly true for flat roofs. It is advisable to hire a residential or commercial flat roof repair services who can assist you on a flat roof or metal roof repair.

The waterproof covering is usually three layers of bituminous felt laid on the roof boarding, you can get help from a residential roofer if you don’t have much roofing experience. The first layer is attached with clout nails. The two subsequent layers are bonded to the one beneath using cither bitumastic (also called cold mastic and mastic bitumen) which is applied cold or a bitumen-based solid compound which has to be turned into a liquid by heating it before it can be applied. The bituminous material is poured on to the underlying felt and spread evenly. The second layer of felt is bedded into the bitumen compound, another layer of bitumen compound is applied and more felt. The compound hardens when it cools.

When professionals employ a Metal Roof Restoration System all joints are over­lapped rather than butted and are arranged so that the joints in the layers do not coincide. These professionals then spread a final covering of stone chippings over the roof and bonded to the felt with a chipping compound. The chippings reflect solar rays which would otherwise cause the felt and bitumen to degrade and fail prematurely. We are a roofing Pittsburgh company willing to help with any roofing repair that you need at home.

Flat Roof

The joint between the house wall and the roof is scaled with a flashing of fell mortared into the wall and stuck to the roof felt.

If a felt-covered flat roof starts to leak, it could be an isolated problem with most of the roof still in good condition or it could be the first sign that the whole covering is on its last legs and will soon need replacing. The first thing to do is to inspect the surface of the roof closely. It is often difficult to pinpoint the exact point of failure of a flat roof – any water which has penetrated the fell covering may have run some way along the roof timbers before finding its way between the joints in the boards and appearing on the ceiling below, in case you can not, Call Crown Roofing to set up your free roofing estimate.

If moisture has got beneath a section of the roof, the felt covering may have bubbled and burst through the action of heat expanding the moisture. In this case, a simple roof repair may be all that is needed cut the bubble and open it out to allow all the trapped moisture to evaporate. Brush a layer of cold bitumaslic compound on to the boards of the roof and then fold the edges of the bubble back into place and bed them into the compound. Spread a layer of bitumaslic compound over the surface and spread a layer of chippings on top of it. So, if you are looking for roofing contractor in Georgetown TX then check out this company to get the help you need.

Flat Roof

But, if the surface is showing signs of general failure, you have two options:

These trips tips and tricks were from a roofer near me.

Filed Under: Home & Maintenance

Tags:

About the Author: Jason Prickett loves to write about home maintenance and stuff you can do yourself instead of hiring any professional. His step by step guides will assist you in completing your home maintenance tasks.

RSSComments (0)

Trackback URL

Comments are closed.