Lathe is a machine tool that turns wood or metal pieces to be hack or ribbed with chisels in order to achieve a variety operations such as cutting, drilling, sanding, knurling, or deformation of the work piece to create an objects like candlestick holders, table legs, bowls, baseball bats, musical instruments, etc. It will be running certainly by means of common sense along with craftsmanship. Modern lathes offer a variety of rotating speeds and a resource to manually and automatically move the cutting tool into the work piece. You have to be very cautious while using a lathe and there are some guidelines that instruct you how to use a lathe.
According to the handyman guides, you should be safe first and have to wear proper safety glasses before you use a lathe. Also, remove off jewels and rings earlier than working on the lathe and don’t wear any attires or accessories that could be easily caught up in the spin. In order to start the work of the object, you have to grease the spinning parts to make sure that the joints and bearings are not grinding or fastening up while you work and then clean the bed of the machine from the remaining sawdust and wood pieces.
Once the machine is prepared for work, you need to ready your work piece. The work piece will constantly come from the table-saw so that you will be starting with a squared work piece also it should be a clear timber. Then fix the work piece between the headstock and the tail stock that is at the center of the machine such that it is supported at both ends, it is steadier, and can bear more force applied on it. The easiest way to do this is to cautiously draw diagonals from opposite corners and then place the work piece where they intersect.
Now start working on the work piece with your chisels and cutting tools, have a spongy touch and you don’t use a lot pressure on wood piece at the start instead increase it slowly with care. Turn on the lathe and smooth the object with a tool of your pick. When you start the lathe you should make sure it is at its slowest speed because if you go too fast you are going to get really rough cuts, going slow at first will help you clean up with fine clean cuts.
Make sure the level of the tool rubs against the wood: that’s how the deepness of the cut is prescribed. The forceful cutting and grooving may result the machine to rear or the worker can be thrown off balance. Simply work slickly and influence in only when you know it’s the right method for making a large groove in the piece. Once the object reaches the desired shape and size, remove it from the machine and use a sandpaper to even the face.
