How to Properly Cut Down a Tree


When a tree is in need of being felled it will become imperative to know how to properly cut down a tree. Your landscape can be improved and made to look even better than before. No matter the situation, whether the tree is diseased or it is dying from any sort of infestation of bugs, immediately cutting it down can be a hazard, people who need a Tree moving service call Environmental Design Inc.

Location is important in terms of cutting any tree down. According to tree services, a tree that is in close proximity to an inhabited building or open road needs be removed in the right way. Here is how to cut a tree. Read on for more information. Source page.

Things You’ll Need:

  • Safety Goggles
  • Ladder
  • Rope
  • Work Gloves
  • Chain Saw
  • Pruning Saws

Step 1

When starting to cut a tree you will need to use a ladder. I suggest an orchard style ladder. This ladder has a supportive leg and is narrow in stature. It is very easy to use inside of spaces like tree branches. Tie some rope to the supporting leg and the rungs of the ladder.

Step 2

Begin at the top of the tree. You will need a chain saw or a prune saw to help with this step. Take off the branches in measured, easy to handle lengths. Do not remove pieces that you cannot hold, lift or handle.

Step 3

Rotate the ladder around the tree while you cut down. Do not try and trim branches that are out of physical reach. They may fall when cut and cause danger. To remedy this, just move the ladder as needed.

Step 4

Always leave a strong branch to support your orchard ladder. Cut down all the branches in site and reach. When the majority of the branches have been cleared, you will need to use a short ladder to complete the job

Step 5

Adjust the ladder so that the trunk of the tree can be cut down safely in sections. Cut the sections into manageable sizes. This is going to make discarding the tree trunk a lot easier.

Step 6

Remove the tree apart and down until approximately 6″ of the ground.

Step 7

Get a stump remover. These can be rented. You can also contact a stump grinding service or this Tree Services Manhattan if you need professional help, learn more here about their services. Saw down the rest of the tree trunk. The machine will lighten the load tremendously. Be careful with this machine because the debris resulting from it can be launched up to 30 feet. Point the end in the opposite direction of your house or any street or thoroughfare prior to beginning to work.

Step 8

Once the branches and trunk have been removed and cut into pieces. Allow the pieces to dry. Burn these pieces as firewood after they have dried.

This task can be dangerous especially if you’re dealing with a large, tall tree. Those who are not confident doing this by themselves can hire a tree removal company instead.

Filed Under: Home & Maintenance

Tags:

About the Author: Jason Prickett loves to write about home maintenance and stuff you can do yourself instead of hiring any professional. His step by step guides will assist you in completing your home maintenance tasks.

RSSComments (0)

Trackback URL

Comments are closed.